Stud Chopper Logo

ON SITE STUD SHEAR SYSTEM

Stud Chopper in Action
 Home   About Us   Contact Us   Portable   Stationary   Buy/Lease   TradeShows   Rentals 
 Return On Investment   Stud Chopper News   How To's   Feedback 

The Stud Chopper Model "E"

THE MODEL "E" was developed for the plant or manufacturing environment. The Model "E" uses the same cutting head as the Model G and comes with five standard blades, namely 3 5/8" through 12". (Optional 14" blade available.) It is powered by a Vickers 10 hp hydraulic unit and comes with a 30 gallon reservoir for additional cooling. You can request either 240 volt, 3 phase or 480 volt, 3 phase controls.

Like the Model "G", the "E" comes ready to cut angles up to 45 degrees. The Model "E" can also be custom ordered for special angle needs.

NEXT